procommander ltc controller firmware 2.07

PROCOMMANDER LTC CONTROLLER FIRMWARE 2.07 UPGRADE
PROCOMMANDER LTC CONTROLLER FIRMWARE 2.07 FULL
PROCOMMANDER LTC CONTROLLER FIRMWARE 2.07 SOFTWARE
PROCOMMANDER LTC CONTROLLER FIRMWARE 2.07 SERIES

PROCOMMANDER LTC CONTROLLER FIRMWARE 2.07 UPGRADE

Firmware upgrade which can now prevent hardware failure when the upgrade fails.

Network interruption when the camera is connected to the network through PPPoE and that the camera’s date and time have been configured to synchronize automatically with a Network Time Server.

Interruption of recording when the GV-IP Camera time is 1, monitoring is enabled and the Synchronized with Network Time Server is activated.

GV-IP Cameras that are set to 1920 x 1080, dual streams.

motions are triggered immediately after post-alarm recording ends.

files are being recycled on the inserted memory card during motion events.

Issue of frame skipping when any of the following scenarios occur:.

PROCOMMANDER LTC CONTROLLER FIRMWARE 2.07 FULL

Distorted image size when PIP is enabled in full screen.

PROCOMMANDER LTC CONTROLLER FIRMWARE 2.07 SOFTWARE

Issue of live view closing when the resolution is set to 448 x 252 and a region for Privacy Mask (under ROI Settings, for GV-IP Cameras connected to third-party software through ONVIF/RTSP) touches the edge of the live view.Interruption of file backup from GV-Backup Center when the backup is carried out to the next day or next month.

Possible disruption of file time for files recorded during DST periods.Support for continuously sending of captured images to the FTP serverĮ169, E1692, E156, EC189, E1752, E1756, E1756C, E169C.Support for text overlay by on-screen display which are viewable through GeoVision software or third-party software through ONVIF and RTSP connection.Support for H.264 video codec CABAC encoding.Support for new image orientation options, 'Rotate 90' and 'Rotate 270'.Support for ONVIF test tool version 14.06.

PROCOMMANDER LTC CONTROLLER FIRMWARE 2.07 SERIES

PTZ control (of GV-PTZ Series and models equipped with motorized varifocal lens).

Support for the following functions through ONVIF.

Support for dual streams in GeoVision Fisheye Cameras.

Support for motion and audio settings using CGI SDK command.

Maximal Bit Rate is set to “6” Mbit or lower for 1.3 MP models, and “8” Mbit or lower for 2 MP, 3 MP, 4 MP, and 5 MP models.

Support for recording to GV-NAS Systems, provided that the camera adhere to the following settings:.

Support for Preset Set and Preset Go functions for models equipped with motorized varifocal lens.

The user interface with a new blank field for users to type CBR bit rate valueįirmware V3.0 applies to the following GV-IP Camera models:.

The problem where the algorithm of UPnP causes IP Cameras to send out excessive packet.

Models installed with a 32 MB NAND flash.

Firmware V3.10 applies to the following GV-IP Camera models:

Procommander ltc controller firmware 2.07